Call : +918068096073
Home » Products » Chemical

Chemical

01
ANTIOX SP is a mixture of Phenols Styrenated to a higher degree as per customer requirements for colour, viscosity and intended application. The mole ratio of Styrene to Phenol varies from between about 2 t o 2.7.
Antiox SP(27)
close
Antiox SP(27)
02
Antiox-SP27 is a mixture of Styrenated Phenols. The average mole ratio (n) of Styrene to Phenol is about 2.65-2.80.
Antiox-SD(20)
close
Antiox-SD(20)
03
Antiox SD20 is a mixture of styrenated diphenylamines. It's a high viscosity, low volatility, high activity, general-purpose liquid antioxidant. It is mildly discolouring, antioxidant ideally suited for stabilization of synthetic polymer based goods.
Foamax is a mixture of non-ionic and cationic surfactants in an aqueous medium. It contains no solvents and is safe to store and transport. Foamax is a unique sensitising agent which destabilises the rubber colloids.The non-ionics stabilise the foam bubbles while the cationics neutralise the protective charge on the rubber particles causing coagulation thereby resulting in good foam structure.
Nimul is Ethoxylated Alkyl Aryl Phenol. The mole ratio of Ethylene Oxide to Alkyl Aryl Phenol is between 16 and 20. It has wide applications from Latex to Pesticide / Pigment emulsions. It improves the chemical stability of natural latex through hydration of the interfacial film.
Nimul SP(2760)
close
Nimul SP(2760)
06
Nimul is Ethoxylated Alkyl Aryl Phenol. The mole ratio of Ethylene Oxide to Alkyl Aryl Phenol is 15.
Nimul SP(2780)
close
Nimul SP(2780)
07
Nimul is Ethoxylated Alkyl Aryl Phenol. The mole ratio of Ethylene Oxide to Alkyl Aryl Phenol is 20.
08
Nimul D has excellent softness and lubricating effect. When added to spray water for removing condoms/balloons from formers, it facilitates easy removal. The aqueous solution of Nimul D tends to foam because of surface activity.
09
Nimul T added to water to control foaming. Together Nimul D and Nimul T provide excellent solution for easy removal of latex products from formers.
Niquat ATAC-(3016)
close
Niquat ATAC-(3016)
10
Niquat ATAC 3016 is a solution of Cetyl Trimethyl Ammonium Chloride. It is an almost water white to slightly yellowish liquid. Niquat ATAC 3016 has wide ranging applications as a biocide including disinfectant formulations for cleaners and as a inhibitor for microbe induced corrosion. It is especially stable in highly acidic conditions making it a superior choice to benzalkonium chloride for toilet bowl cleaner applications.
Niquat ATAC-(5016)
close
Niquat ATAC-(5016)
11
Niquat ATAC 5016 is a solution of Cetyl Trimethyl Ammonium Chloride. It is an almost water white to slightly yellowish liquid. Niquat ATAC 5016 has wide ranging applications as a biocide including disinfectant formulations for cleaners and as a inhibitor for microbe induced corrosion. It is especially stable in highly acidic conditions making it a superior choice to benzalkonium chloride for toilet bowl cleaner applications.
Niquat BKC-(50)
close
Niquat BKC-(50)
12
Niquat BKC is an aqueous solution of dodecyl dimethyl benzyl ammonium chloride. It is a colourless to slightly yellowish liquid. Niquat BKC is made from more than 97% C12 alkyl dimethyl amines to ensure highest effectiveness as a biocide. It has wide ranging applications as biocide including disinfectant formulations for skin, toileteries and as a inhibitor for microbe induced corrosion. It is also effective as a phase transfer catalyst, and further finds use as a cationic surfactant.
Niquat BKC-(80)
close
Niquat BKC-(80)
13
Niquat BKC is an aqueous solution of dodecyl dimethyl benzyl ammonium chloride. It is a colourless to slightly yellowish liquid. Niquat BKC is made from more than 97% C12 alkyl dimethyl amines to ensure highest effectiveness as a biocide. It has wide ranging applications as biocide including disinfectant formulations for skin, toileteries and as a inhibitor for microbe induced corrosion. It is also effective as a phase transfer catalyst, and further finds use as a cationic surfactant.
14
Pafloc 500 is a highly cationic solution almost linear polymers formed by condensation of secondary amines and epihalohydrins. It’s primary use is in industrial water treatment uses.
15
STABILOL is surfactant composed of highly sulfated fatty acid ester based on a special proprietary blend of fatty acids. It is viscous liquid. Due to the blend of fatty acids, on standing some components may crystallize out but is entirely water soluble and active.
Waxmul is an emulsion of Fully Refined Paraffin Wax in water. The emulsifiers used are non-ionic unlike conventional wax emulsions which are based on fatty acid soap. This provides the emulsion excellent stability even in hard water. The non-ionic surfactants used are alcohol ethoxylates and considered non-toxic substances.
23
Waxmul MC is non-ionic o/w emulsion of proprietary blend of paraffin and microcrystalline waxes. Waxmul MC is used for various applications such as softening of polymeric substrates, providing resistance to attack by oxygen and ozone, provide a lubricating feel to polymers and paper.


Back to top
NIKITA TRANSPHASE ADDUCTS PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.